2019 Caterpillar TL642D Telehandler
Lot 05 · Stock TH-19055 · Serial CAT0TL64ETBL01477 · Superior, MT · 4 photos · 1 views
1 / 4
Condition report
Percentages are remaining service life measured at inspection, not a subjective rating. Anything under 60% is called out in the notes below.
- Included
- Carriage and forks · frame levelling · three steering modes
- Serviced
- Serviced at 3,900 hrs. Boom and hydraulics tested and holding.
- Known faults
- Boom wear pads at 82% — routine replacement item.
Transport dimensions
| Shipping length | 21'6" |
|---|---|
| Shipping width | 8'0" |
| Shipping height | 8'2" |
| Weight | 22,400 lbs |
| Carrier | Standard step-deck, no permit required |
Specifications
| Year | 2019 |
|---|---|
| Manufacturer | Caterpillar |
| Model | TL642D |
| Hour meter | 3,980 Hours |
| Engine HP | 74 HP |
| Engine | Cat C3.8 Turbo Diesel |
| Operating weight | 22,400 lbs |
| Fuel | Diesel |
| Serial number | CAT0TL64ETBL01477 |
| Condition | used |
| Stock number | TH-19055 |
| Location | Superior, MT 59872 |
| Category | Telehandlers |
Operating specifications
| Max lift capacity | 6,600 lbs |
|---|---|
| Max lift height | 42 ft |
| Max forward reach | 29 ft 6 in |
| Drive | 4WD, 3 steering modes |
Machine overview
2019 Caterpillar TL642D Telehandler with 3,980 hours. A 6,600 lb capacity machine reaching 42 feet — the standard workhorse for framing, masonry and general construction lifting. Powered by a 74 HP Cat C3.8 turbo diesel. Four-wheel drive with three steering modes and frame levelling. Enclosed cab with heat. Fitted with carriage and forks. Tyres at approximately 75 percent. Boom and hydraulics tested and holding.
- 6,600 lb capacity, 42 ft reach
- Three steering modes including crab steer
- Frame levelling
- Carriage and forks included
- Enclosed cab with heat
- Tyres at approximately 75%